MEPCO Bill History
Last checked 26 September 2026
The fastest way to see your MEPCO bill history is the bill itself. Each bill carries a history box with the units, bill amounts and payments of recent months.
See your history online
- Open your latest bill with the MEPCO bill checker, using your 14-digit reference number.
- Find the history box. It lists recent months with the units used, the amount billed and the payment made.
- Compare month by month. Look for a sudden jump in units, a missing payment or a month billed on an estimate.
What to look for in your history
Your protected status
You count as a protected consumer only if you used 200 units or less in every one of the past 6 months. One month above 200 ends it. Count the months above 200 in your history to see where you stand. The tariff page shows how much the lower protected rates save. The protected consumer guide explains how to keep or regain the status.
Your lifeline status
Lifeline rates are for single-phase connections with a sanctioned load up to 1 kW. Your highest month in the last twelve, and the current month, must be 100 units or less.
Estimated or defective-meter bills
MEPCO's FAQ explains that when a meter is declared defective, the bill is estimated from your use in the same month last year and marked "est def". The meter should be replaced. If it has not been replaced after 2 to 3 months, MEPCO asks you to contact your sub-division. See how a faulty MEPCO meter is replaced.
A sudden big bill after small ones
Meters are read once a month on the date printed on the bill. If readings were missed or too low for a few months, the catch-up month can be large, and a large month can cross a slab edge. Compare the present reading on the bill with your meter; the MEPCO meter reading guide shows how to read it. MEPCO's FAQ asks you to get a clear difference between the bill and the reading corrected, because it can lead to over-charging or under-charging on the next bill.
If the history shows a mistake
- Wrong reading: MEPCO's FAQ says to contact the customer service centre in your area or at MEPCO headquarters. The bill correction guide sets out the full process.
- Arrears you already paid: show the bank or payment receipt at your sub-division or customer service centre to get them removed.
- Anything else: use the complaint channels, including helpline 118 and the online portal.
Want to know what next month will cost? Try the MEPCO bill calculator.
Sources: MEPCO FAQ page (mepco.com.pk/faqs); consumer category definitions from NEPRA's determination of MEPCO's supply tariff, 7 January 2026. Checked 26 September 2026.